Rockfall Netting

Products Description

Rockfall Netting
Double twist mesh rolls is supplied in roll form from the production facility in lengths of 25 m and 50 m. The roll dimension varies depending on the width and length of the roll required and whether the woven wire has the additional PVC coating. The rolls are individually strapped at the factory for easy handling and transporting. Soil nails, anchors accessories etc., and installation equipment in the form of power actuated tools are not supplied by We and are to be sourced from approved suppliers.

Rockfall Netting Preparation and Placement

Placing double twist mesh rolls is an operation generally performed on faces or slopes close to the vertical and sometimes of considerable height. Although placing of the mesh may vary from site to site, the work may be reduced to four main phases.
1. Preparation of the surface tobe blanketed (removal of loose rock particles, barring down).
2. Placing the netting over the surface to be protected by lifting the rolls to the top of the face and then unrolling them.
3. Fixing the netting to the wall and tying them.
4. Final fastening of the net at the top, foot and if necessary the face.